Pre-treatment----
1- preheat press to 330
2- Spray my pretreatment just so I see a light mist 3- brush down fairly firm to make sure to get it into the fibers. I only brush the one direction. 4- use the quilan parchment paper and press at 330 for 15 seconds. Take off the paper and press another 10 seconds. Then I am ready to print.
Last edited by hallockracing94; August 27th, 2009 at 01:12 PM.
That should work fine Let us know if you have any problems. That is very similar to the method I use, except I press for 10 seconds with paper, and then 10 without. What are you brushing it with? I found a paint brush works best. The foam brushes tend to leave little specks of foam on the garment.
__________________
Always do right; this will gratify some people and astonish the rest. ~~~Mark Twain BobbieLee www.brightlittlebeginnings.com
fast t-jet3 Pre-treatment white shirts 
Let us know if you have any problems. That is very similar to the method I use, except I press for 10 seconds with paper, and then 10 without. What are you brushing it with? I found a paint brush works best. The foam brushes tend to leave little specks of foam on the garment.
