Need to Register?

thutch15 · August 29th, 2009

Has anyone used this digitizing software? It looks more advanced then my $6,000 software. Just curious if it is as good as they make it out to be.

dan-ann · August 29th, 2009

go to their website - there is a free version you can get for just shipping. Heard lots of good things about it. I sent for it but have not had time to play around with it. Good tutorials come with it.

zoom_monster · August 29th, 2009

Quote:

Originally Posted by thutch15


	Has anyone used this digitizing software? It looks more advanced then my $6,000 software. Just curious if it is as good as they make it out to be.

Troy, I've had the "pro" version of this software for several years. If you bought yours more than a couple of yeas ago It might very well be more advanced. The "free" version is limited when compaired to the "dongeled" version, but the interface is exactly the same so that if you do upgrade, it works the same with added advanced features. The free version has branching, blending, special fill stiches and paths, Full control on shortstiches, saved parameters, full manual digitizing tools, auto shape, and vector tools... etc. You can't go wrong by trying it

Ian

thutch15 · August 30th, 2009

Quote:

Originally Posted by zoom_monster


	Troy, I've had the "pro" version of this software for several years. If you bought yours more than a couple of yeas ago It might very well be more advanced. The "free" version is limited when compaired to the "dongeled" version, but the interface is exactly the same so that if you do upgrade, it works the same with added advanced features. The free version has branching, blending, special fill stiches and paths, Full control on shortstiches, saved parameters, full manual digitizing tools, auto shape, and vector tools... etc. You can't go wrong by trying it Ian

Thanks for the info...I use Forte Digitizing software and this free version seems to have a lot of features that my software does not have. I will be trying it out. Thanks.

SierraSupport · August 31st, 2009

Quote:

Originally Posted by thutch15


	Thanks for the info...I use Forte Digitizing software and this free version seems to have a lot of features that my software does not have. I will be trying it out. Thanks.

Ian won't say it, but I will for him... B-Town PixelPrint is a dealer for Stitch Era Universal, so make sure to get it from him! (and I hope I'm not breaking forum rules)

thutch15 · September 1st, 2009

Ok Ian, I just placed my order...I cannot wait! Oh by the way where did you come up with Btown Pixel Print???

zoom_monster · September 1st, 2009

Quote:

Originally Posted by thutch15


	........Oh by the way where did you come up with Btown Pixel Print???

B for Bakersfield. Home town of Merle Haggard and Jonathan Davis...

aimagedesign · September 2nd, 2009

I'm in Canada (Toronto) and would love to obtain a copy of this software.

But unfortuanetly there seems to be no distribution here!

I tried buying the CD on-line (via: btownpixelprint.com) but because of my location the 'system' just bumped me out!

Any suggestions?

Thx.

:-)

Sincerely

Peter

zoom_monster · September 2nd, 2009

Quote:

Originally Posted by aimagedesign


	I'm in Canada (Toronto) and would love to obtain a copy of this software. But unfortuanetly there seems to be no distribution here! I tried buying the CD on-line (via: btownpixelprint.com) but because of my location the 'system' just bumped me out! Any suggestions? Thx. :-) Sincerely Peter

Peter, if you go to the Free Sierra site, dealer page there is a form that's below the "dealer not found" area. I've attached a screenshot.

Ian

aimagedesign · September 3rd, 2009

Quote:

Originally Posted by zoom_monster


	Peter, if you go to the Free Sierra site, dealer page there is a form that's below the "dealer not found" area. I've attached a screenshot. Ian

Thanks Ian.

I followed the ling and filled in the necessary info.

(fingers crossed)

Peter

thutch15 · September 15th, 2009

Hey Ian, just wanted to verify with you that the software I got from you has no auto digitizing, correct? If that is the case is there any way to get a trial of the upgraded software? I was under the impression that the software would have some auto digitizing. I am more than happy to buy the upgrade, but I dont want to without being able to see how it works. Thanks Troy

zoom_monster · September 15th, 2009

Quote:

Originally Posted by thutch15


	Hey Ian, just wanted to verify with you that the software I got from you has no auto digitizing, correct? If that is the case is there any way to get a trial of the upgraded software? I was under the impression that the software would have some auto digitizing. I am more than happy to buy the upgrade, but I dont want to without being able to see how it works. Thanks Troy

Troy, It does have auto digitizing, an raster to vector converter and also a more interactive way to digitize using shape recognition. If you go to the questionmark in the upper right window you have the full manual and window type help files. Also Troy, you can find more help in the users group at: StitchEraUniversal : STITCH ERA UNIVERSAL Embroidery Software or just e-mail me privately.

Ian

SierraSupport · September 15th, 2009

Quote:

Originally Posted by thutch15


	Hey Ian, just wanted to verify with you that the software I got from you has no auto digitizing, correct? If that is the case is there any way to get a trial of the upgraded software? I was under the impression that the software would have some auto digitizing. I am more than happy to buy the upgrade, but I dont want to without being able to see how it works. Thanks Troy

In addition to the User Manual, when you launch the software you have the Video Tutorial icon on the software start page, towards the top. One of the lessons is all about auto digitizing, I'd start there.

draig · September 18th, 2009

I'm interested in trying this software but I'm in the UK, when I look at the dealer network page it states not currently available in your country. There is a review from a UK based customer, so where am I going wrong.

Sharon

zoom_monster · September 18th, 2009

Quote:

Originally Posted by draig


	I'm interested in trying this software but I'm in the UK, when I look at the dealer network page it states not currently available in your country. There is a review from a UK based customer, so where am I going wrong. Sharon

Sharon, there was a post about this a few days ago Stitch Era Universal Digitizing Software

if you click on that link, fill out the form and you should be contacted. There are several users in the UK that I've seen in the users group.

Ian

Need to Register?

Resources

T-Shirt Sites

Stitch Era Universal Digitizing Software