propsuper

My toyota 830 went to the great embroidery room in the sky last week so i bought an 850 with a 270 cap frame. Now comes the problem, how to do beanies ( big part of my business) and cap backs. Just wondering if anyone has a way of doing this, also will a 270 frame from hoop tech solve my problems. Thanks in advance for any input or suggestions.

 

Reply With Quote

astitchinthyme

do you still physically have your 830, I am after some spare parts for my 820a (which is the same but 6 needle ) if you still have it.

 

Reply With Quote

lizziemaxine

I use my Fast Frames for beanies and cap backs.

__________________
Jane Swanzy
Swan Threads

 

Reply With Quote

propsuper

Sorry, no
Traded it in . Ck with Datastitch.com they have the machine and were gonna use it for parts.
Good luck

I do have a hoop tech frame and framing gauge that will fit your 820
if you need one.

 

Reply With Quote

propsuper

I have a fast frames but always had a problem with the adhesive gumming up the needles/

 

Reply With Quote

lizziemaxine

Quote: Originally Posted by propsuper I have a fast frames but always had a problem with the adhesive gumming up the needles/

Slide a piece of wax paper under the frame and it will help keep the gummy stuff from building up on your needles.

__________________
Jane Swanzy
Swan Threads

 

Reply With Quote

astitchinthyme

thanks for the quick response. Its the pcb and part of the thread catcher mechanism I'm after. Will look at the Datastich website. Thanks again

 

Reply With Quote