Looking for tall cut shirts for dye sub. Badgers shirts are the closest thing I can find but hoping someone might have a source for a true tall dye sub shirt.
Try the following. This shirt is much longer than any standard-sized tee & feels incredible on the skin. You can actually stretch it, whereas other "sublimation" tees are really tightly woven -- almost inflexible. I've used the white, sandstone, & birch grey.
S&S Activewear has them ranging from $3.81-$4.54 (white) & $4.39-$5.17 (colors). That's right in line with the traditional market - for what I feel is a better product. You do need an account to see prices & place an order. The stock is low on various sizes right now. So, you'll have to check them out to see if they have what you need.
Also find them below. A little pricier, but no account needed. because it's 100% poleyster -- not cotton -- it get's LONGER after the wash, not shorter. If that makes sense. You need to try one for yourself to see what I mean. Always try before makingt a large order.
Try the following. This shirt is much longer than any standard-sized tee & feels incredible on the skin. You can actually stretch it, whereas other "sublimation" tees are really tightly woven -- almost inflexible. I've used the white, sandstone, & birch grey.
S&S Activewear has them ranging from $3.81-$4.54 (white) & $4.39-$5.17 (colors). That's right in line with the traditional market - for what I feel is a better product. You do need an account to see prices & place an order. The stock is low on various sizes right now. So, you'll have to check them out to see if they have what you need.
Alright, now that i'm home from work i double checked my old inventory. Turns out that the softer, longer tee is the:
Anvil dri-release® Heavyweight Short Sleeve T-shirt - 97 (SNS# 00120)
85% polyester/15% cotton 5.6 ounce heavyweight
Double-needle stitched neckline, sleeves and bottom hem
dri-release® tagless label inside back neckline
Shoulder-to-shoulder taping
Adult: S, M, L, XL, 2XL, 3XL
I still had a couple of each I've listed. The one above is 31.5 inches neck to hem in an XL. Sorry for the misinformation earlier. They are both good. But the ANVIL is softer & longer than the Jerzee.
Alright, now that i'm home from work i double checked my old inventory. Turns out that the softer, longer tee is the:
Anvil dri-release® Heavyweight Short Sleeve T-shirt - 97 (SNS# 00120)
85% polyester/15% cotton 5.6 ounce heavyweight
Double-needle stitched neckline, sleeves and bottom hem
dri-release® tagless label inside back neckline
Shoulder-to-shoulder taping
Adult: S, M, L, XL, 2XL, 3XL
I still had a couple of each I've listed. The one above is 31.5 inches neck to hem in an XL. Sorry for the misinformation earlier. They are both good. But the ANVIL is softer & longer than the Jerzee.
The JiffyShirt site says that the #97 are 85% cotton. Is their site wrong?
Tall Cut Shirts for Dye Sub 
