got in this morning from the long weekend and saw that my
dtg had some flashing lights....one look and i knew it was the waste ink counter needing to be reset....
today was my scheduled day for monthly maintenance, so i just turned the machine off and started my cleaning (which includes pulling all the white ink out of the lines, cleaning the lines and nipples, then priming up the machine with fresh white ink along with regular cleaning of capping station, squeegees and around the printhead)....
after i'm finished cleaning, i try to reset the waste ink counter....hold in button inside waste ink door, and error eject....press power, and release the other two, then hold the button inside the waste ink door.....my machine does nothing....the error eject light continues to blink...
if i press the power button before releasing the waste ink button, the machine just shuts off....if i release the waste ink button before the power, the ink lights flash, then the print carriage goes through its regular routine of moving down to the left side and then back to the right before turning off....
i've even tried cleaning the encoder strip and still get nothing.....any help would be greatly appreciated!
Error Eject and Ink Lights Blinking Alternately 
