Had a clog - ran isopropyl alcohol through all the lines to clean things up and ended up having to replace one damper (red) that had a hole or something.
However, my nozzle checks keep showing no black ink. I've cleaned the little inserts in the air holes on the ink bottles. Cleaned the lines. If I use a syringe, the black pulls through the damper just fine, so I'm guessing it's a print head clog still?
Thanks! I did that, plus a few more head cleanings and it did the trick. I'm back up and running, thank goodness.
BTW - I got the cleaning with alchohol trick on here just the other day and am SO VERY PLEASED with how well it works. I can't say how glad I am I found this board!
Be careful when using isopropyl alcohol with your printer. While it does a good job of breaking down ink deposits - it also dries out rubber components like those in the capping station and the wiper. I would never recommend that anyone run isopropyl alcohol through their printer, it can also cause delamination of the printhead ultimately causing it to fail.
Be careful when using isopropyl alcohol with your printer. While it does a good job of breaking down ink deposits - it also dries out rubber components like those in the capping station and the wiper. I would never recommend that anyone run isopropyl alcohol through their printer, it can also cause delamination of the printhead ultimately causing it to fail.
What would you do next? 
