it is the last problem i have to solve. missalignment of white and coloured layer with the brand new hm1. does the machine needs calibration? how can i do this?
help brothers and sisters.
in your rip pro program if you go to ink configuration and go to the choke setting you will see a box with 4 numbers one on top one on bottom and one on each side, the default is -1 on each box. start by changing each one to 1 in each box and see how that does, if it needs more than change to a higher number. the way they adjust is top, bottom, left and right. if you need more help let me know. I too had this problem and it is very easy to fix. make sure to only change where your white ink is showing outside your design. like on mine I had a very small line on top so I changed the top and bottom numbers only and this fixed mine.
i can't find this "ink configuration" section. where is it? are you talking about the "margins"? there are four boxes with little arrows pointing to bottom, left etc in the properties of print set up.
i can't find this "ink configuration" section. where is it? are you talking about the "margins"? there are four boxes with little arrows pointing to bottom, left etc in the properties of print set up.
The ink configuration menu is located in the "Utilities" menu, click "Utilities", then you will see "Printer and Ink Configuration" Select the "Choke and Feed Adjustment" tab.
Your manual should have information on how to use this feature.
For technical issues you may want to go onto the DTG Forums. If you are not registered there I can provide you with an invitation. PM me if you need the invite.
The ink configuration menu is located in the "Utilities" menu, click "Utilities", then you will see "Printer and Ink Configuration" Select the "Choke and Feed Adjustment" tab.
Your manual should have information on how to use this feature.
Interesting that the Flexijet manufacturer would know the software and manual for the DTG printer.
file, edit, image, adjustment, selection, color, queuemanager, options, view, window, help and no utilities in any of those. that's all my print pro has. is there anything else that has not been installed? by the way my manual has no information about this feature. i can't understand. i read about the margins; nothing to do with misallignment. thanks for the help, keep on please.
best
ilias
hm1 kiosk missalignment problem 
