Need to Register?

anewbeginning · 2 Weeks Ago

Its probably the 3rd time its happened since ive had the machine...not a regular occurrence but just want to know if its happened to other people.
It generally makes a high frequency sound for 2 passes of the print head then dumps a band of ink.
(see pic)
After resetting and doing around 10 head cleans its operational again

tfalk · 2 Weeks Ago

Never had that happen... given that it dumped the ink in the wrong place, my first guesses would be either link in the carraige sensor or your encoder strips needs to be cleaned.

Don-SWF East · 2 Weeks Ago

Check out this link from our support site, it should take care of the "fart"

Rainbow Effect on the DTG | DTG Kiosk FAQ's

Hope this helps!

equipmentzone · 2 Weeks Ago

Quote:

Originally Posted by anewbeginning


	Its probably the 3rd time its happened since ive had the machine...not a regular occurrence but just want to know if its happened to other people. It generally makes a high frequency sound for 2 passes of the print head then dumps a band of ink. (see pic) After resetting and doing around 10 head cleans its operational again

Your carriage assembly is probably sticking as it moves side to side. Shut off your printer and unplug it. Move the carriage assembly from side to side and see if its a smooth action. If not the shaft might be sticky and need to be cleaned and lightly oiled.
More likely your gear on the motor that drives the carriage belt is dirty. You may need to get a pick to clean the grooves in the pulley. Also check the belt for wear or dirt.

Harry
Equipment Zone