I went ahead and moved this for you Judith
I will try to explain how I do them
I am assuming you are using the pocket platens which are the 5.5 inch platens.
The way I set it up to print two at the same time is that I set my platens with the garments on them on each corner of the front of the machine. One on the left and one on the right. I use a square to make sure the edges are flush with the machine.
Then on my graphics program I have a custom page size set up 13" x 22" which is the size of the printbed. Once I have my custom page set up loaded in my graphics program I set up grid lines.
The first grid line is set Vertically in 5/8" from the left top corner, then the second vertically I set up at 12 3/8" in. Then I set a grid line at 5 1/8" and 8 1/8, these are both vertical lines as well.
Then going down horizontally from the top, I put another grid line down 5/8".
And then another horizontally down from the top at 5 1/8.
These lines will give you the print area you have to work within. You will set your designs within this area, as that is your print area of the designs.
Ok I am going to post this now, but I am going to make a screen shot of how I set up the gridlines to make it easier for you
Be Right Back
How do you set up the printer to print on infant platens? 
