Need to Register?

ninjabuddha · June 10th, 2009

I'm fairly new to the DTG community, but I've been drawn to the Anajet Printers. I'm planning on visiting their facility in Costa Mesa when I return to LA, but I was wondering if anyone could have me a heads up on pricing. I know I will most likely be putting up between $10-15G for a used-new printer. Can someone clue me in on ink prices, replacement parts? Are prices typically much cheaper at shows?

ken692 · June 10th, 2009

well if I had it to do over I would keep my eye's open for a used anajet and save myself 7 to 10 thousand, its funny experience comes just shortly after you really need it.
look for one that has a serial number over 1300 of somthing like that this is the 2nd model

the cleaning fluid the ink and white run $54 $64 and $74 per cartridge and the system uses 8 total

good luck
hope this helps

ninjabuddha · June 11th, 2009

Quote:

Originally Posted by ken692


	well if I had it to do over I would keep my eye's open for a used anajet and save myself 7 to 10 thousand, its funny experience comes just shortly after you really need it. look for one that has a serial number over 1300 of somthing like that this is the 2nd model the cleaning fluid the ink and white run $54 $64 and $74 per cartridge and the system uses 8 total good luck hope this helps

Thanks! I would love to get my hands on a 2nd hand printer to get my feet wet as opposed to spending the money for a new printer. Wow I wasnt aware how expensive ink cartridges were. Are these regular inks or the ANABright inks I keep seeing on their website.....Or are they one and the same?

ken692 · June 11th, 2009

there the same. they have two now, older black ones and the new gray ones. seems like a lot but you get lots of shirts if you don't wast it trying to keet the print head from drying out.

Ken

T3Design · May 4th, 2011

I visited the Costa Mesa facility for Anajett when I was out there. It was pretty cool but there are several other options to chose from IMO

Adam Tipre · June 10th, 2011

Hey Larry,

First off love the NinjaBudda, by far the best name I have seen on this forum.

I'm happy you are looking into an AnaJet, if you reach out to an RM here at AnaJet they can give you all pricing infromation.

I would recomend a new printer over a used one (of course you probably knew I was going to say that) but either way if you purchase new or used please contact us so we can make sure you are getting the service you need with your printer. I would also really encourage you to come to our training here in Costa Mesa.

Best of luck.

Adam at AnaJet

SPG313 · June 10th, 2011

We have an Embroidery business and just started the screenprint using a Heat Press. It's only good for large orders because we have to order custom ink transfers and press them on the shirts. Saw the ANAJET SPRINT and are very interested! Does anyone know if the offer any kind of financing program through ANAJET for the printer? We have been passing on alot of small jobs and need the printer.

Need to Register?

Resources

T-Shirt Sites

[Anajet] Anajet Prices